GB
5
Dear Customer,
Before you use the chisel hammer for the first time,
please read these instructions and note the
information for the tool’s operation and maintenance.
Always keep this manual with the tool.
1. Items supplied
1 chisel hammer
1 plug-in nipple R 1/4”
1 quick-change clamping spring
2.Technical data
Permissible working pressure max.
6 bar
Air consumption
113 l/min.
Chisel holder (hexagonal)
10 mm
Stroke
43 mm
Blow rate
4500 blows/min.
Recommended hose diameter
Ø 9 mm
Compressed air quality
cleaned and oiled
Air supply
via conditioning unit with filter pressure
reducer and mist oiler
Compressor capacity
approx. 250 l/min. equivalent to a motor
rating of 2.2 kW.
Work settings
6 bar working pressure set at the pressure
reducer or filter pressure reducer
Please note:
When working with the chisel hammer, be sure to
wear the necessary protective clothing,
particularly goggles, ear-muffs and safety gloves.
Observe the safety regulations.
3. Illustration
Item
Description
6
trigger lever
7
air regulating screw
12
cylinder
13
clamping spring
14
plug-in nipple for air supply
4. Proper use
The chisel hammer is a pneumatic tool for general
use. It can be used, for example, to cut grooves, to
remove tiles or plaster, to knock holes through walls,
to cut metal sheet and plate, and to knock off bolts
and rivets.
The exhaust air leaves the housing to the front.
Repairs and maintenance work are to be carried out
only by authorized specialist workshops.
Please note!
The power of the tool will be reduced if you use a
hose that has too small an inner diameter or
which is too long.
12
7
14
13
6
Anleitung DL-MH 09.03.2004 9:22 Uhr Seite 5
