—
38
—
DLP Projector — Owner’s Manual
Setup Menu
Press the
Menu
button to open the OSD menu. Press the arrow keys (
pq
) to select
SETUP
and press
the
Enter
button to enter the
SETUP
menu. Press the arrow keys (
pq
) to select the menu option and
press the
Enter
button to enter its submenu. Press the arrow keys (
pqtu
) to select or adjust the
desired settings and press the
Enter
button
to confirm.
PICTURE
OUTPUT
SETUP
OPTION
SETUP
English
Auto
Off
Top Left
On
Language
Ceiling Mount
Rear Projection
Lens Function
Menu Location
Menu Preferences
Keypad LED Settings
PIN
I
tem
D
escrIptIon
Language
This item allows you to select an available language for the OSD display.
Ceiling Mount
Turn the image upside down for ceiling-mounted projection.
Rear Projection
Reverse the image so you can project from behind a translucent screen.
Lens Function
Configure the lens function settings. See “Lens Function Menu” on page 39.
Menu Location
Set the menu location on the display screen. Available options: Top Left,
Top Right, Center, Bottom Left, and Bottom Right.
Menu Preferences
Configure the menu preferences settings. See “Menu Preferences Menu”
Keypad LED Settings
Turn the backlight of the keypad on/off.
PIN
Configure the PIN settings. See “PIN Menu” on page 40.
12V Trigger
Set the setting to On to turn on the 12V trigger when the lamp is lighted.
Set to Off to disable the 12 trigger turning in any state.
4K Compatible (HDMI1)(*) /
4K Compatible (HDMI2)(*)
Set to On to enable EDID of HDMI 2.0 for the HDMI1 or HDMI2 port.
Communications
Configure the communications settings. See “Communications Menu” on
Note:
•
(*)The common HDMI versions are HDMI 1.4 and 2.0. With HDMI 1.4, the rate of 4K is limited to 30
frames per second, whereas HDMI 2.0 plays 4K video without compromise, at 50 and 60 frames per
second. This projector supports both HDMI 1.4 and 2.0. In order to play the HDMI content properly,
set up the projector EDID for the input devices with different HDMI specifications.
4K material
