—
34
—
DLP Projector — Owner’s Manual
Output Menu
Press the
Menu
button to open the OSD menu. Press the arrow keys (
pq
) to select
OUTPUT
and press
the
Enter
button to enter the
OUTPUT
menu. Press the arrow keys (
pq
) to select the menu option
and press the
Enter
button to enter its submenu. Press the arrow keys (
pqtu
) to select or adjust the
desired settings and press the
Enter
button
to confirm.
Aspect Ratio
Edge Mask
H Digital Zoom
V Digital Zoom
H Digital Shift
V Digital Shift
Image Warping
PIP / PBP
PICTURE
OUTPUT
SETUP
OPTION
OUTPUT
Auto
0
100
100
50
50
I
tem
D
escrIptIon
Aspect Ratio
Display an image with the detected size, or resize the image by maximizing
either the height, width or both, or resize to the maximum size possible
while keeping the original aspect ratio. Available options: Auto, 4:3, 16:9,
16:10, LBX, and Native.
Edge Mask
Remove the video encoding noise on the edge of video source.
H Digital Zoom
Change the size of projector’s display area horizontally. If the display area
has been resized by this setting, it can be moved by changing the H Digital
Shift and V Digital Shift settings.
V Digital Zoom
Change the size of projector’s display area vertically. If the display area
has been resized by this setting, it can be moved by changing the H Digital
Shift and V Digital Shift settings.
H Digital Shift
Move the display area horizontally if its size has been changed by the
Digital Zoom setting.
V Digital Shift
Move the display area vertically if its size has been changed by the Digital
Zoom setting.
Image Warping
Configure the image warping settings. See “Image Warping Menu” on page
PIP/PBP
Configure the PIP/PBP settings. See “PIP/PBP Menu” on page 36.
Note:
•
When 16:9 Aspect Ratio is selected, the resolution of the input signal or 1600x1200 will
automatically be switched to 1600x900.
•
If Auto is selected and input signal is 16:9, screen type will auto become (1920x1200).
•
If Native is selected, the screen will automatically become 1:1 mapping centered.
