Eiki EK-610U Owner'S Manual Download Page 78

Page: 78 / 90

—

DLP Projector — Owner’s Manual

LED Error Messages

The LED status indicators are located on the rear of the projector. Each LED is defined below.

•

Power LED

LeD s

tatUs

rojector

tate

UrpLe

LUe

Steady Light

Off

Standby state (LAN connection is inactive).

Flashing (0.5

sec on/0.5 sec

off)

Off

Standby state (LAN connection is active).

Off

Steady Light

Power is on and lamp is lighting.

Off

Flashing (0.5

sec on/0.5 sec

off)

Off

Cooling for an abnormal shutdown.

Note:

During firmware upgrade, the Power LED lights purple, and Lamp LED, Temp LED, and Filter LED light red.

•

Lamp LED

LeD s

tatUs

rojector

tate

Steady Light

Lamp has failed and is in error state.

Flashing (3 sec on/1 sec off) Lamp driver has failed and lamp is in error state.
Flashing (1 sec on/1 sec off) Color wheel has failed.

•

Temp LED/Filter LED

LeD s

tatUs

rojector

tate

emp

)

ILter

)

Steady Light Off

Over temperature. The projector will shut down.

Flashing (0.5

sec on/0.5

sec

Off

Fan has failed and is in error state.

Flashing (3

sec on/1 sec

off)

Flashing (1

sec on/1 sec

off)

Filter has overheated and is in error state.

Off

Steady Light Filter switch has failed and is in error state.

Summary of Contents for EK-610U



























































































Search results

Summary of Contents for EK-610U

Reviews:

Brands by name

Popular brands

Eiki EK-610U, Owner'S Manual

Search results

Summary of Contents for EK-610U

Reviews:

Brands by name

Popular brands