Eiki EIP-D450, Owner'S Manual

Page: 45 / 66

43
Adjusting the Projected Image (“SCR - ADJ” Menu)
Menu operation
n
Page 38
SEL./ADJ. ENTER END
Resize
Image Shift 0
0 Keystone
Overscan
OSD Display
Closed Caption
Background
PRJ Mode
Language
Front
English
Logo
On
Off
On
Border
Pict. SCR-ADJ PRJ Net. Help
DLP ® Link TM Off
DLP
®
Link
TM
Invert
0 IRE
Video Setup
9
0
8
5
6
4
3
2
1
7
1
Setting the Resize Mode
Use this function to stretch the image
vertically or horizontally or when the edges of
the image cannot be seen.
For details of the Resize mode, see pages
30 and 31 .
You can also press RESIZE on the remote
control to set the Resize mode. (See page 30 .)
•
•
Note
2
Adjusting the Image
Position
You can move the projected image vertically.
Q
button
O
button
This function only works in some Resize
modes. (See pages
30 and 31 .)
•
Note
3
Keystone Correction
When the image is projected either from the top
or from the bottom towards the screen at an
angle, the image becomes distorted trapezoidally.
The function for correcting trapezoidal distortion
is called Keystone Correction.
Select “Keystone” on the “SCR-ADJ”
menu and adjust with the slide bar.
See page 28 for details of Keystone Correction.
The Keystone Correction can be adjusted up
to an angle of approximately ±40 degrees
(when “Resize” is set to “Normal”).
You can also press
KEYSTONE on the
remote control or on the projector to adjust
Keystone Correction.
•
•
Note
4
Setting the Overscan
This function allows you to set the overscan area
(display area).
Selectable
items
Description
On The input area is displayed without the
screen edges.
Off The whole input area is displayed.
You can set “Overscan” for the following input
signals (Computer, DVI-D Video and DVI-Analog).
—480P, 540P, 576P, 720P, 1035
I
and 1080
I
/1080P
If noise appears at the screen edges when
“Off” is selected, set the function to “On”.
Also see “About Copyrights” on page
31 .
•
•
•
Note
5
Setting the On-screen
Display
Selectable
items
Description
On All on-screen displays are displayed.
Off INPUT/VOLUME/AV MUTE/FREEZE/
AUTO SYNC/RESIZE/PICTURE MODE/
ECO+QUIET/MAGNIFY/ “An invalid button
has been pressed.” are not displayed.