manualshive.com logo in svg

Eicon Networks SHIVA 1100, Administrator'S Manual, Page: 40 / 136

Share
Download
Eicon Networks SHIVA 1100 Administrator'S Manual Download Page 40

DHCP server configuration

40

System Administrator’s Guide

DHCP server configuration

The DHCP server allows the automatic distribution of IP, gateway, DNS and WINS 
addresses to hosts running DHCP clients on the LAN ports. 

To configure the DHCP server

1

Click the 

DHCP Server

 link in the 

Networking

 section of the menu bar.

2. Click 

Add Server

.

3. Configure the DHCP server settings and click 

Apply

.

•

Enter the 

Subnet

 and netmask of the IP addresses to be distributed.

•

Enter the 

Gateway Address

 that the DHCP clients will be issued with. If this 

field is left blank, the Shiva VPN Gateway's IP address will be used.

•

Enter the 

DNS Address

 that the DHCP clients will be issued with. If this field 

is left blank, the Shiva VPN Gateway's IP address will be used. Leave this 
field blank for automatic DNS server assignment. If your Shiva VPN Gateway 
is configured for DNS masquerading, you should either leave this field blank, 
or enter the IP address of the LAN port of the Shiva VPN Gateway.

Summary of Contents for SHIVA 1100









































































































































Reviews:

No comments