Eicon Networks SHIVA 1100, Administrator'S Manual, Page: 26 / 136

Wireless port settings
26 System Administrator’s Guide
• Security: This option enables the wireless security option that protects the
network. Two options are available:
• WEP: Provides encryption of the wireless data stream using a set of
predefined keys for all stations.
• WPA-PSK: WPA with pre-shared key. Provides encryption of the wireless
data stream using either TKIP or AES. More secure than WEP.
• WEP Authentication: Sets the type of authentication method to use for WEP.
• Open system: ?????
• Shared Key: ?????
• WEP encyrption: Sets the number of bits to use for the WEP key.
• WEP Key 1 to 4: WEP supports up to four keys. Encryption keys can be
either 5 (40-bit) or 13 (104-bit) ASCII characters in length. Hexadecimal keys
are not supported. To function properly, all wireless stations have identical
key lists. If you define only one encryption key, it must be entered in the first
key field. If you configure one key only in fields 2, 3, or 4, you may not be
able to access your wireless network, even if you have configured your
wireless computer card in the same manner.
• WPA Algorithm: Sets the algorithm that is used to generate user-specific
keys based on the master WPA key.
• WPA Key: Sets the master WPA key that is used to generate user-specific
keys. AES specifies three master key sizes: 128, 192 and 256 bits. TKIP
????
Setting up an ACL
The ACL (access controll list) that enables the Shiva VPN Gateway to permit or deny
access to wireless client stations based on their MAC addresses. This is an effective
way to protect access to the wireless network.
To activate the ACL:
1 Click Network Setup on the main menu.
2. Select Edit Wireless configuration in for the Wireless port.
3. Click the ACL tab.