Manual EICKEMEYER II dental polisher/ drill
3/6
4
Safety instructions
1. Never leave the unit unsupervised when there are children or persons inexperienced in using the unit
nearby.
2. Only use the unit for the applications described in these operating instructions. Only use bits and
accessories recommended by the manufacturer.
3. Never use the unit if the power cord is damaged or if the unit has been dropped or come in contact
with water.
4. Please follow the care instructions in the handpiece manual.
5. Do not clean or lubrify the handpieces during operation.
6. Switch off the unit before changing the rotation direction.
7. Use the folowing cutout for the Control box: 220V/250V/2A.
8. Switch off the unit before changing filling bits.
9. The bit has to rotate before it can be used on a tooth.
10. Wear protective goggles during operation and ensure an adadequate extraction of air.
11. When storing the unit, insert one bit into the chuck of the handpiece.
5
Operation
Operating conditions:
Temperature:
+10°C~+40°C
Humidity:
30%~75%
Air pressure:
700~1060 hPa
IMPORTANT NOTE:
Handpiece may only be used with included Foot pedal.
Damaged burs can cause early material fatigue.
6
Maintenance
You have purchased a low-maintenance dental unit. Only the carbon brushes in the micro motor should
be changed once a year. Please send us your unit in.
It is crucial to thoroughly clean and lubrify the handpieces after each use!
(recommended spray: #174010 and adapter #17401150).
Before cleaning the micro motor please make sure to lock the micro motor with the locking screw
(included) in order to prevent liquids entering the micro motor!
After lubrication put the micro motor with
the head down into the mount
