301801 • 1/2021 • H.S.
23 of 48
Operating Instruction
High Pressure Cleaner cold water, mobile
Series 2x2
4 Installation
Mounting the trigger gun onto the spray lance
○
Pull back the quick lock (see figure lower left) of the trigger gun
and insert the lance.
○
After inserting the lance, make sure that the quick lock arrests
fully forward again.
Connecting to the water supply net
○
For the water supply, connect the water supply hose 1/2“ (DN13)
to the filter.
4.3.2 Device version Premium
General information
The following assembly instruction provides a general example of
assembling the device version Premium.
For device assembly proceed as follows:
Press
Press
Pull
Unlocking the hose reel
○
Press in the locking buttons with the thumb and index finger and
at the same time pull the handle out of the locking.
