Reinigungstechnik
CarWash-Systeme
Projektmanagement
EHRLE-GmbH
Industriestraße 3
89165 Dietenheim
USt-IdNr.DE 130839188
Page 1 von 4
State 07.02.2020
Tel.: +49 (0)7303/1600-0
eMail: [email protected]
Subject to changes
Quick Start Guide
–
Charging Terminal
for EHRLE-CarWash-Key
Unpack everything (dispose of holding carton and plastic packaging)
Combine the power supply and plug it into the table charging station and power supply.
Insert enclosed paper roll (outside direction display)
Power on - small red button (top left of the keyboard)
o
The charging station starts automatically with a self-test (Piep)
o
The customer name according to programming appears at the top of the display.
o
Further at the bottom of the display date and time
o
There is a short message "Insert card / On load" = Ready for use
INITIALIZE NEW BONUS-KEY
Take NEW or NOT initialized keys and keep them close to the display
o
Possibly now comes an error message "He. 12 Card Access - Remove Card"
o
This message comes when the key was to short on the display
o
Solution: hold a little longer and
center
to the display
o
Please new attempt
The "NEW" card ID number now appears on the display
In the middle "Add Application Successfully Completed"
o
Thus, the key is initialized and works with the key readers on the respective system
BONUS LOADING ON BONUS KEY
Take initialized keys and keep them close to the display
o
Possibly now comes an error message "He. 12 Card Access - Remove Card"
o
This message comes when the key was to short on the display
o
Solution: hold a little longer and
center
to the display
o
Please new attempt
The existing key/card value is displayed
At the top of the display, the card ID number is also briefly displayed
o
Enter the desired amount using the keyboard (Attention: enter 00 by comma)
o
Confirm the process with
"ENTER"
and immediately hold the key back to the display.
You now have 13 seconds to transfer
If the key is not loaded, a "piep-piep"
the operation is then aborted
o
Please try again
o
When the transaction is finished get your receipt by pressing „ENTER“ 2x.
