Ehong EH-MA41, User Manual

Page: 5 / 26

EH-MA41 User Guide
5-26
Indicator Short Description Comments
General Indicators
OK Indicates a command was adopted by the module.
ER Indicates there is an error detected in the command
sent by the host.
AP State of Bluetooth module as an application.
AD Bluetooth address of the module.
TP Tx Power of the module
CD Class of Device of the module.
PF Configuration of profiles of the module.
FT Features of the module.
MM States of Man-In-The-Middle protection.
IO Configuration of IO capability of local device.
MT Configuration of force to be master feature.
SN Configuration of sniff feature.
SP The deep sleep state.
PN Fixed pin code of the module.
NM Local friendly name of the module.
IF Host interface of the module
BR UART baud rate.
UM Configuration of UART mode.
UI Configuration of UART indicator output.
RC Configuration of remote control function.
PM Configuration of PIO assignment
DB Default configuration of bypass mode.
MD Discoverable state.
PA State of pairing mode.
CA State of connectable mode
NC Six digit number of numeric comparison.
PK Passkey request.
AC Voltage of AIO
IR Inquiry result.
FD Address and name of found device.
LC List the connected devices
SPP Indicators
SM Service name of the SPP profile.
SS State of SPP channel.
CS Result of connect attempt to a remote SPP device.
DT Data packet received from remote SPP device.
HID Indicators
IS State of HID.
CI Result of connect attempt to a remote HID host.
KR Keyboard report received from remote HID host.
5. Description of ASCII Commands