Setting Date and Time via the Network
If the device is connected to the internet or an internal NTP server is available on
the network, it is advisable to configure time and date automatically via SNTP.
1.
Enter the name or IP address of an NTP server.
2.
Click
Sync NTP
to test the configuration. If the connection is successful, the
button will turn green and the time and date will be updated. If the button
turns red, however, the connection to the NTP server was not established
successfully. Please ensure that the device is connected to the internet or use a
local NTP server.
3.
Click
Save
to apply your changes.
ℹ
Information
If a valid NTP server has been set up, time and date will be
updated automatically once per hour.
Setting Time and Date Manually
If no NTP server is available, time and date can also be set manually.
1.
Click
Set time manually
. This will open a new input field for time and date.
2.
The values can be manually entered into the fields
Date
and
Time
. Please use
the format selected during the initial setup.
3.
Click
Save
to apply your changes.
38
