11.4.2 Activating a Firmware Image
Once it has been installed, the new firmware version
needs to be activated. Open the page
Maintenance /
Firmware
.
1.
Select the
Buffer
containing the firmware image you
want to activate in the section
Activate firmware
.
2.
Click the button
Activate
to activate the new
firmware.
Querx will now copy the buffer's contents into its
internal memory and then reboot.
⚠
Attention
Do not disconnect Querx from the power supply while
a firmware image is being activated. If an image is
copied incompletely, the device can no longer be
used and needs to be sent to the manufacturer to be
serviced.
11.4.3 Activating an Alternate Firmware Image
Querx can activate the firmware image stored in the
second buffer, if you encounter any unexpected
problems after updating the firmware.
You will need:
a biro
100