i
Information
Please note that Querx needs to be rebooted after
uploading a configuration file.
11.3
Resetting the Configuration
There are two ways of resetting the configuration to the
factory settings, via the web interface or a hardware
button.
When the configuration is reset via the web interface,
the network settings will remain unchanged. This
function can be used if any changes to the
configuration require a reboot.
When the configuration is reset via the reset button, all
settings, including the network configuration, are reset
and the device is returned to factory settings entirely.
This function is primarily used if Querx is no longer
accessible via the network.
11.3.1 Resetting the Configuration Via the Web Interface
Open the page
Maintenance / Reset
in the configuration
area.
1.
Click the button
Reset configuration
.
2.
Confirm that you want to reset the configuration by
clicking
Yes
on the following page.
97
