Action
Step
Wait 5 minutes and then release air slowly through the vent valve until the
fluid flow starts, then close the valve.
7
Result: The vessel jacket is purged.
Stop the TCU, remove the reservoir cap, refill the reservoir with coolant, and
reinstall the cap.
8
Empty the vessel jacket
CAUTION
Slippery surface. Use caution when emptying the vessel jacket,
and when filling the vessel jacket with the coolant. Spilling the
coolant on the floor makes the floor slippery and may cause acci-
dents.
Follow the instructions below to empty the vessel jacket.
Xcellerex XDUO 2500 Mixer Operating Instructions 29146667 AH
139
5 Installation
5.5 Connect temperature control unit
