Electrical Operation and Maintenance Manual for ER15-1400 Industrial Robot
13
Chapter Two Handling and Installation
2.1 Overview
This chapter includes installation instructions and information about ER15-1400 robot in
workplace.
It is vitally important to read all the safety information before any installation. Please be sure
to read the following information carefully: EFORT robot safety manual, general safety
information in the first chapter of this manual that must be read thoroughly, and introduction of
dangers and safety risks during operation.
2.2 Basic Description
2.2.1 Unpacking List
1
、
Before unpacking, please confirm whether the outer packaging of the product is intact;
2
、
After unpacking, please confirm whether all parts of the robot are complete and whether
the model is consistent with the order. If you find missing or wrong parts, please contact the
supplier in time.
Table 2-1 Robot Unpacking List
Robot Unpacking List
Number
Name
Standard configuration
Number
Unit
Remarks
1
Robot body
Standard configuration
1
SET
2
Robot control cabinet
Standard configuration
1
SET
3
Control cabinet – robot
body connecting cables
Power cable
1
SET
Standard length 8m, cable
optional length 16m
4
Encoder cable
1
SET
Standard length 8m, cable
optional length 16m
5
Ground wire
1
PC
Standard length 8m, cable
optional length 16m
6
Robot teaching pendant
and cables
Standard configuration
1
SET
7
Operation instruction
Standard configuration
1
SET
8
Final factory inspection
report
Company standard
1
PC
9
Product certification
Company standard
1
PC
10
Robot accessories
Accessory box
1
PC
11
Main power cable of
robot
Standard configuration
1
SET
Has been put in the
accessory box
12
Other
One 10A glass tube fuse
Note: The above is a standard configuration list, excluding customized models. For details,
