22
Trigger
Parameters for each pad
Input
Selects optimizing target trigger input
Zone
Selects target zone
Assign
You can switch trigger input assignment for
Tom 4 and Crash 3 inputs .
• Tom 4 cable: Tom 4 or Crash 1 Cup
• Crash 3 cable: Crash 3 or Crash 2 Cup
*
Only for Tom 4 / Crash 3 input .
Pad
Selects the pad model which is connected
to the input .
*
When the pad model is changed, internal
trigger settings are automatically set to the
appropriate values .
Sens
Adjusts sensitivity of the pad for all zones .
The default value is 0 .
Sens B
Adjusts zone B sensitivity of the pad .
The default value is 0 .
*
Only for the inputs zone B is available .
Sens C
Adjusts zone C sensitivity of the pad .
The default value is 0 .
*
Only for the inputs zone C is available .
Threshold
Adjusts threshold of the pad .
Only when the trigger signal coming from
the pad exceeds this level, the trigger is
acquired .
The default value is 0 .
Head-Rim
Border
Determines border between the head-shot
and the rim-shot .
When the rim-shot sound can be heard even
though the head is struck, set it toward H .
The default value is CTR .
*
Only for snare and tom inputs .
Curve
Adjusts the sensitivity of the pad in mf
(middle) strike strength .
The default value is 0 .
Trigger
In this section, you can optimize the pad sensing settings as needed .
The EFNOTE 3/5’s trigger settings are already configured appropriately at the factory state .
PAD
Trigger
levels
Curve type
Summary of Contents for EFNOTE 3
Page 1: ...EN Reference Guide for Ver 1 0 ...
Page 29: ...29 ...
Page 30: ...EFNOTE3 5 RG EN Rev 02 2020 2020 Ef Note Inc ef note com ...
