Operation of EFAS – Driver and Co-Driver
27
EFAS
If the
special condition „OUT of scope“ (digital tacho-
graph is not required)
is enabled, the following will be dis-
played: “
OUT
”, current local time, and the symbol for the
digital tachograph mode.
Further information about
OUT
can be found in the section
"Digital Tachograph not Required" on page 39.
3.3
Co-Driver Taking Over
When the co-driver takes over the vehicle, withdraw your
driver card from the left-hand card slot and insert the card of
the new driver.
Note
The driver card of the person driving the vehicle must always be
in the left-hand card slot.
Note
If the special condition „
OUT
of scope“ (digital tachograph not
required) is active, the condition is automatically switched off
after withdrawal of the driver card.
Co-Driver taking over the vehicle
1. Park your vehicle. Leave the ignition on.
2. Withdraw the driver card. Press key
1
for longer than
1.5 seconds to withdraw the card.
The display asks for the country where your journey
ends.
3. Use the cursor keys
and
to select the country
where your journey ends. Press
OK
. The list of
country codes is shown in the section "Nation &
Region Codes, Time zones" on page 120. When
selecting Spain, the region must also be selected.
The display offers the
Daily report print-
out?
.
4. If you want to end the shift, use the cursor to select
YES
and press
OK
.
The list of driver activities is printed. The driver card is
ejected.
or
