Efkon EFAS User Manual Download Page 21

Display and Controls

21

EFAS

Current work periods and activities 

for driver and co-driver  

The first line displays the following information from left to 
right:
• Number of card slot for driver
• Symbol for current activity of driver
• Current driving time
• Interruption of driving time 

(according to regulation (EC) No. 561/2006)

The second line displays the following information:
• Number of card slot for co-driver
• Symbol for current activity of co-driver
• Current duration of activity of co-driver
• Current local time
• Symbol for current mode (in this case OPERATIONAL)

Driving times driver 1  

The first line displays the following information from left to 
right:
• Number of card slot for driver, the display refers to: 

1 = Driver

2 = Co-driver

• Symbol for driving time and duration of driver‘s driving 

time

• Total driving time interruptions 

(according to regulation (EC) No. 561/2006)

The second line displays the following information:
• Total driving time on current day
• Total driving time in the last two weeks

Summary of Contents for EFAS








































































































































Reviews: