EFKA DA320G5351
8
3.3 Connection
Diagram
Socket ST2 corresponds to socket A
in1 - Key for output B
i10 - Backtack suppression/recall
M9
- LED righthand thread monitor
in2 - Machine run blockage
M1 - Thread trimmer
M10
- LED for output A
in3 - Needle up/down
M2 - Needle cooling
M11
- LED for output B
in4 - Key for output A
M3 - Thread wiper
FL
- Sewing foot lifting
in5 - Intermediate backtack
M4 - Thread tension release
VR
- Backtacking
in6 - Thread monitor
M5 - Output B
POS1
- Position 1
in7 - DB2000
M6 - Output A
POS2
- Position 2
in8 - DB3000
M7 - LED lefthand thread monitor
GEN
- Generator impulses
in9 - External light barrier
M8 - LED backtack suppression/recall
R-N-EXT - External potentiometer for
speed limitation (50k
Ω
)
1)
Nominal voltage 24V, no-load voltage max. 30V momentarily after power on
2)
Transistor output with open collector (max. 40V, 10mA)
3)
Nominal voltage 15V, I
max
= 30mA
4)
Nominal voltage 5V, I
max
= 20mA
*)
Front view of the socket (component side) and/or rear view of the plug (soldering side)
ATTENTION!
When connecting the outputs, ensure that a total power of 96VA constant load will not
be exceeded!
