- AB620A5035
Instruction Manual
- 54 -
10 Operating Elements and Socket Connectors
10.1 Positions of the Front Side
A
Power switch
B
Network control lights
C
Control panel
(onboard module)
+
Display
(4-digit 7-segment display)
Key
P
Call or exit programming mode
E
Start backtack single / double / off
Enter key for modifications in the programming mode
+
End backtack single / double / off
In the programming mode - increase of the value indicated
>>
Basic position 1 or 2
In programming mode as shift key
–
Automatic sewing foot lifting at stop in the seam On/Off
Automatic sewing foot lifting after thread trimming On/Off
In the programming mode - decrease of the value indicated
The upper vertical segments of the 4 digit 7 segment display indicate the
switching states of foot lifting and basic position.
1
Single start backtack
2
Double start backtack
3
Single end backtack
Tape cutter at the start of the seam ON/OFF (mode 7)
4
Double end backtack
Tape cutter at the seam end ON/OFF (mode 7)
5
Basic position “needle position 1“
6
Basic position “needle position 2“
7
Automatic sewing foot lifting at stop in the seam
8
Automatic sewing foot lifting after the thread trimming operation
Connector
B20 USB Memory Stick
10.2 Positions of the rear side
Connector
B2
Commutation transmitter
B18
Light barrier module LSM002
-
Hall sensor module HSM001
-
Pulse encoder IPG001
(Adapter cord 1113229 in case of multiple assignment)
B41
Motor power supply
B80
Actuator
ST2
Socket for inputs and outputs
e. g. solenoids, solenoid valves, displays, keys and switches
B776
V810/V820 Control Panel
B22
(KN19)
Knee switch
Summary of Contents for AB620A5035
