EFILive FlashScan V3, Quick Start Manual

Page: 1 / 3

Knowledgebase > FlashScan V3 > FlashScan V3 Hardware Configuration > Move Files
to/from FlashScan V3
Move Files to/from FlashScan V3
EFILive Support - 2020-07-29 - Comments (0) - FlashScan V3 Hardware Configuration
Move files from FlashScan V3 to PC
There are two methods to move tune files from your FlashScan V3 to PC;
Connect FlashScan V3 as a USB Thumb Drive to Windows Explorer
To move tune files and log files from FlashScan V3 onto your PC;
Connect FlashScan V3 to your PC. 1.
On FlashScan V3 navigate to Options -> File System -> USB Thumb Drive. 2.
Using Windows Explorer, locate the files you wish to copy in the correct folder of 3.
your FlashScan V3 and copy or drag the files into the desired folder on your PC.
EFILive Explorer
To move tune files and log files from FlashScan V3 to your PC;
Connect FlashScan V3 to your PC. 1.
Open EFILive Explorer. 2.
Navigate to the directory on your PC where you wish to save the file. 3.
Navigate to: [F3: Data Files]. 4.
Select appropriate folder on your FlashScan device and drag the selected file to your 5.
PC.