10
7 When asked what you want to do, click “Back up hard disk drive(s)”.
8 At the “Backup settings” screen, do the following:
• Specify the type of data storage medium you want to use as the backup destination.
You can choose from USB drive, DVD, network share, or external hard disk drive.
• Specify whether to include job files resident on the Fiery proServer in the system backup.
• Deselect the option to create bootable media.
It is recommended that you do not create a bootable backup. Certain computer settings
are required in order to boot from a backup medium. Your computer may not be set up for
this.
9 Continue to follow the on-screen instructions to back up the system disk(s).
10 When prompted, remove the System Software 1 DVD and press any key to restart Windows.
N
OTE
:
It is recommended that you save a copy of the Fiery XF license. For more information,
see
“Saving your Fiery proServer configuration” on page 13
.
Returning the Fiery proServer system to an earlier state
It may occasionally be necessary to return the Fiery proServer system to an earlier state. You
can do this by:
• Using a backup that you have previously created
Fiery XF is restored with all the settings, including system environments, that were current
at the time the backup was created. Any settings made after the backup was created are
lost. For more information, see
“Backing up the Fiery proServer system” on page 9
• Returning the Fiery proServer system to its factory state
The Fiery XF license and all your Fiery XF settings, including system environments, are
deleted from the hard disk drives. You need to return the Fiery proServer to its factory
state, for example, if the default password has been changed and misplaced.
• Reinstalling the Fiery proServer from scratch
The Fiery XF license and all your Fiery XF settings, including system environments, are
deleted from the hard disk drives. You need to reinstall the Fiery proServer from scratch,
for example, after replacing a defective hard disk drive.
