manualshive.com logo in svg

EFI Fiery ES IC-418, Configuration And Setup, Page: 9 / 243

Share
Download
EFI Fiery ES IC-418 Configuration And Setup Download Page 9

Requirements for Windows client computers

The Fiery ES utilities and printer drivers support the standard Windows operating systems and system specifications.

Supported operating systems for Windows client computers

The Fiery ES utility applications and printer drivers are supported for the following Windows operating systems on

client computers.

Note: 

Support for Windows versions is based upon the latest service pack. Both 32 and 64-bit versions are supported

unless otherwise noted.

•

Windows 8.1: Windows 8.1, Windows 8.1 Pro, Windows 8.1 Enterprise

•

Windows 10: Windows 10 Home, Windows 10 Pro, Windows 10 Enterprise, Windows 10 Education, Windows

10 Mobile, Windows 10 Mobile Enterprise, Windows 10 IoT Core

•

Windows Server 2008 R2 (64-bit only): Foundation, Standard, Enterprise, Datacenter, Web Server, Itanium-

Based

•

Windows Server 2012 (64-bit only): Foundation, Essentials, Standard, Datacenter

•

Windows Server 2012 R2 (64-bit only): Foundation, Essentials, Standard, Datacenter

•

Windows Server 2016: Windows Server 2016 Technical Preview

System requirements for Windows client computers

The following table lists the system specifications required to install and use Fiery ES utility applications and printer

drivers on Windows client computers.

System requirement

Description

Processor

Pentium 4, 1.0 GHz or faster

Memory (except for Command WorkStation)

500MB (2GB recommended)

Hard disk space (except for Command WorkStation)

1GB (2GB recommended)

Requirements for Mac client computers

The Fiery ES utilities and printer drivers support the standard Mac operating systems and system specifications.

Supported operating systems for Mac client computers

The Fiery ES utility applications and printer drivers are supported for the following Mac operating systems.

Configuration and Setup

System requirements

9

Summary of Contents for Fiery ES IC-418




















































































































































































































































Reviews:

No comments