EFI Fiery ES IC-418, Configuration And Setup, Page: 36 / 243

3
If you use a proxy server to connect through a firewall to the Update Server, click the
HTTP Proxy Settings
link. In
the
Proxy
dialog box, select
Enable HTTP Proxy
, enter the following information, and then click
Save
.
•
Address: proxy server IP address
•
Port: port used by the proxy server
•
User Name: user name for accessing the proxy server
•
Password: password for accessing the proxy server
4
Click
Save
.
Note:
To confirm all outstanding updates are installed, check for product updates (for example, click
Check for
Product Updates
on the
Home
icon in WebTools).
Managing firewalls
If your network includes a firewall, make sure that the network firewall is configured to enable communication
between the Fiery ES and the client computers.
If the Fiery ES is behind a network firewall, configure a proxy server to allow the Fiery ES access to the internet for
automatic updates.
To configure a proxy server, open Configure and select
Network
>
Proxy
, then select
Enable HTTP Proxy
and enter
the required information about the proxy server.
User software
User software applications are first downloaded from the Update Server to a partition on the Fiery ES hard disk
drive. Users access the Fiery ES over the Internet and download the applications onto client computers and then
manually install them.
Configuration and Setup
Administration
36