manualshive.com logo in svg

EFI Fiery ES IC-418, Configuration And Setup, Page: 211 / 243

Share
Download
EFI Fiery ES IC-418 Configuration And Setup Download Page 211

Uninstall user software on a Windows computer

To remove user software after you have installed it on a Windows computer, use the Fiery User Software Installer.

Note: 

Do not attempt to uninstall user software from the Windows Control Panel.

For information, see 

Modify user software from media

 on page 8.

Installing user software on a Mac OS computer

Installation of user software on a Mac OS computer is done separately for each application.
Note the following:

•

When you initiate installation of an application, any previous version installed on the client computer is

automatically removed.

•

All applications must be from the same package of software. When you initiate installation of one application

from a package, all applications on the client computer from a different package are removed. You are prompted

to re-install the applications from the new package. If necessary, you can manually uninstall the user software

using the Fiery Software Uninstaller.

Adobe Acrobat and Enfocus PitStop, for use with Fiery Impose/JobMaster/Compose are supplied with your Fiery

Impose/JobMaster/Compose kit and are installed in a separate operation. For more information, see 

Fiery make-

ready applications

 on page 20.

Note: 

Fiery JobFlow is not supported on Mac OS computers.

Installing and uninstalling user software on a Mac OS computer can be done from the User Software DVD, or over

the Internet or your company intranet. Ask your network administrator for the IP address of the Fiery ES.
Use your Internet browser to access WebTools on the Internet. For complete information about browser and system

requirements, see 

Configuration and Setup

.

For information about installing printer drivers, see 

Printing

.

Install user software on Mac OS from media

1

Insert the Fiery ES User Software DVD into the DVD drive of your computer.

2

In the 

User Software

 window, open the 

Mac_User_SW

 folder.

3

Double-click the 

Fiery Applications.dmg

 icon.

4

Double-click the icon for the application that you want to install.

5

Follow the on-screen instructions.

Utilities

Installing user software

9

Summary of Contents for Fiery ES IC-418




















































































































































































































































Reviews:

No comments