EFI Fiery ES IC-418, Configuration And Setup, Page: 10 / 243

Note: Support for Mac OS versions requires Intel-based Mac computers.
•
Mac OS X v10.9
•
Mac OS X v10.10
•
Mac OS X v10.11
•
Mac OS X v10.12
System requirements for Mac client computers
The following table lists the system specifications required to install and use Fiery ES utility applications and printer
drivers on Mac client computers.
System requirement Description
Processor Intel processor that supports the version of Mac installed. For
more information, go to apple.com .
Memory (except for Command WorkStation) 500MB (1GB recommended)
Hard disk space (except for Command WorkStation) 500MB (1GB recommended)
System requirements for Command WorkStation and WebTools
The following specifications are required to install and use Command WorkStation or WebTools on a client
computer.
Note:
The Fiery ES supports Command WorkStation and WebTools by default (no configuration is required).
Requirement Descriptions
Internet browser versions supported for using WebTools and
for viewing Configure within Command WorkStation
•
Windows: Internet Explorer 11 or later, Firefox 31.0 or
later, Chrome 37.0 or later
In addition, Microsoft Edge is supported for client
computers that are running Windows 10 (not supported
for other versions of Windows)
•
Mac OS: Safari 7 or later, Firefox 31.0 or later, Chrome
37.0 or later
Note:
Microsoft releases frequent updates to Internet
Explorer. Because support cannot be guaranteed for all
versions, use the specified version for best results. On Mac
OS, some versions of Firefox may not allow you to enter
passwords into Configure. If this occurs, use Safari instead.
Memory (required for Command WorkStation only) 1GB or more
Hard disk space (required for Command WorkStation only) 3GB
Configuration and Setup
System requirements
10