Make sure there is adequate disk space on the E300:
•
Confirm that only essential files are stored on the E300.
Do not store unnecessary files on the E300, and do not install third-party software.
•
Reduce the number of jobs retained in the Printed queue.
This setting can be found in
Configure
>
Job Management
>
Printed Queue
.
•
Remove inactive jobs from the queues.
When you remove inactive jobs, new jobs are spooled and printed more quickly.
Periodically review the jobs in the Held queue and other queues.
•
If disk space on the E300 is frequently low, it may help to disable the Printed Queue.
This setting can be found in
Configure
>
Job Management
>
Printed Queue
.
VDP search path
Note:
Paths for common global objects are used by Fiery JDF, and any change in these settings will change the file
paths for JDF printing.
User-defined search paths for a single job
A user can enter a single search path when they send the job from a Windows printer driver, or if they override the
job to include a search path.
The path must be fewer than 256 characters, and in the format of a mapped drive (for example,
Z:\folder
) or a UNC
(for example,
\\computer name\folder
).
Clearing the server
The
Clear Server
command allows you to clear print jobs, VDP resources, and logs from the E300.
Note:
Before clearing the server, confirm that print jobs are backed up onto your own media as required.
Note:
Jobs can also be deleted by right-clicking on the jobs in the lists in Command WorkStation.
In Command WorkStation, click
Clear Server
from the
Server
menu. Command WorkStation displays a list of which
data can be cleared.
The following types of data can be cleared:
•
Held jobs
•
Active jobs
•
Printed jobs
•
Archived jobs that are stored on the server
•
Archived network links to jobs
Configuration and Setup
Administering the E300
55