Offset Jobs
Specify whether to have jobs offset after they are printed. You must have a finisher installed. If you set this option to
Off, all offset functions are disabled, including those that occur between jobs.
Settings:
Off
(default)
On
Cover Page
Specify whether to print a cover page (job summary) containing the name of the user who sent the job, document
name, E300 name, time the job was printed, the number of pages printed, and the job status. If a PostScript error
occurs and the
Print to PS Error
option is set to
Yes
, the cover page lists the PostScript error message instead of the
job status.
Note:
The user can enable/disable this option for each job.
Settings:
No
(default)
After job
Offset within job
Use
Offset within job
to offset print jobs (shift the paper in the output tray) that are multiple-page/multiple-copy
jobs.
Settings:
No
(default)
Yes
Print Master
Select
Yes
to print a FreeForm master when created and printed to the E300. The master is retained on the E300
after printing unless deleted later. Select
No
only to process and hold a FreeForm master on the E300.
Settings:
No
(default)
Yes
Cache PDF and PS Objects
Specify whether images in PDF and PS files are cached to reprocess the same image in a file.
Settings:
Off
On
(default)
Configuration and Setup
Configuring print job processing settings
45