EFI EB-34 Installation And Service Manual Download Page 92

Page: 92 / 117

Installation and Service Guide: Printer Controller EB-34

Installing System Software

To activate a client-based Fiery option:

Make sure that Command WorkStation is installed and configured on the computer.

For detailed installation and configuration instructions, see

Utilities

, which is part of the user documentation set.

On the computer, click

Start

All Programs

Fiery

Fiery Command WorkStation

In the server list, select the EB-34.

Choose

Administrator

from the user menu and type the appropriate password. Then click

The default Administrator password is “Fiery.1”, but may have been changed by the site administrator.

Right-click a held job and choose

Preview

In the Preview window, choose

Help

Manage License

Use the controls in the activation window to activate the option.

You will need the License Activation Code (LAC) that is provided with the Fiery option kit. For help with the

activation process, click the “?” link in the activation window.

•

If the computer has an Internet connection, see the help topic on activating the Fiery option automatically.

•

If the computer has an Internet connection but cannot connect to the licensing server, see the help topic on

configuring a proxy server.

•

If the computer does not have an Internet connection, see the help topic on activating the Fiery option manually.

To install Acrobat and PitStop Edit:

If needed, uninstall all versions of Acrobat and PitStop Edit that currently reside on the computer.

Be sure to restart the computer after uninstalling any applications.

Close all open applications.

Insert the Adobe Acrobat/Enfocus PitStop disc (Windows or Mac OS) into the media drive of the computer.

The Adobe Acrobat/Enfocus PitStop disc is provided with the Fiery option kit.

If the installer does not start automatically, navigate to the root level of the disc and double-click

Setup.exe

(Windows) or Setup.app (Mac OS).

Click

Install

and follow the on-screen instructions.

(Mac OS only) Start Acrobat. When prompted, type the license number from the license.txt file that is located on

the root level of the disc.

The client-based Fiery option is now ready for use on the computer.

Summary of Contents for EB-34






















































































































Search results

Summary of Contents for EB-34

Reviews:

Related manuals for EB-34

Brands by name

Popular brands

EFI EB-34, Installation And Service Manual

Search results

Summary of Contents for EB-34

Reviews:

Related manuals for EB-34

Brands by name

Popular brands