EFI EB-34 Installation And Service Manual Download Page 91

Page: 91 / 117

Installation and Service Guide: Printer Controller EB-34

Installing System Software

Installing and activating Fiery options

This section describes how to install and activate server-based and client-based Fiery options.

Activating a server-based Fiery option

To use a server-based Fiery option (such as Fiery ImageViewer), you must first activate it. No additional software

installation is required.

To activate a server-based option:

On the EB-34 with a monitor, keyboard, and mouse, click

Start

All Programs

Fiery

Fiery Command

WorkStation

Or, from a client computer with the user software installed, click

Start

All Programs

Fiery

Fiery Command

WorkStation.

Connect to the EB-34.

For details, see the Command WorkStation Help.

Choose

Administrator

from the user menu and type the appropriate password. Then click

The default Administrator password is “Fiery.1”, but may have been changed by the site administrator.

Go to Device Center > General > General Info, and click

Manage

Use the controls in the activation window to activate the Fiery option.

You will need the License Activation Code (LAC) that is provided with the Fiery option kit. For help with the

activation process, click the “?” link in the activation window.

•

If the EB-34 has an Internet connection, see the help topic on automatic activation.

•

If the EB-34 has an Internet connection but cannot connect to the licensing server, see the help topic on

configuring a proxy server.

•

If the EB-34 does not have an Internet connection, see the help topic on manual activation.

Installing a client-based Fiery option

To install a client-based Fiery option (such as Fiery Impose or Fiery Compose), you must:

•

Activate the Fiery option on the computer that will be using the Fiery option

•

Install Adobe Acrobat and Enfocus PitStop Edit on the computer

Note:

You must activate the client-based Fiery option and install software on each computer that will be using the

Fiery option.

Summary of Contents for EB-34






















































































































Search results

Summary of Contents for EB-34

Reviews:

Related manuals for EB-34

Brands by name

Popular brands

EFI EB-34, Installation And Service Manual

Search results

Summary of Contents for EB-34

Reviews:

Related manuals for EB-34

Brands by name

Popular brands