23
Installation and Service Guide: Printer Controller EB-34
Using the EB-34
•
Flashing or solid red:
An error has caused printing to be disabled.
•
No light:
The EB-34 is powered off and the AC power cable is not connected to a power source.
Buttons
The following buttons are on the control panel:
•
Line selection buttons:
Use the four line selection buttons on the right side of the control panel to select the
command displayed on the corresponding line of the LCD display.
•
Up and Down buttons:
Use these buttons to scroll to different screens in multi-screen lists or prompts.
•
Menu button:
Press this button to view other display screens. Several different display screens show different types
of information about the EB-34.
Functions menu
The following options are available from the EB-34 Functions menu:
•
Eject CD/DVD
allows you to eject media from the DVD drive. Media is also automatically ejected whenever the EB-
34 is restarted, shut down, or rebooted. A hardware eject button is also located below the disc slot.
•
IP Address
displays the current IP address of the EB-34.
•
Restart Server
includes options to Restart (soft reset) or Reboot (hard reset) the EB-34. Selecting
Restart
resets the
EB-34 server software, but does not reboot the entire system. Selecting
Reboot
shuts down all EB-34 activity and
reboots the system. When you select
Restart
or
Reboot
, network access to the EB-34 is temporarily interrupted and
all currently processing jobs are aborted and may be lost.
•
Shut Down System
shuts down all EB-34 server software and powers off the system. Always select this option
before turning off the system.
Avoid using the reset button on the front panel, as doing so may cause the system to operate unpredictably. Use the
reset button on the front of the EB-34 only if the system is unresponsive to keyboard or mouse actions.
Using the copier touch panel
There are tabs on the copier touch panel that are specific to the EB-34. They provide many of the same controls
available from Command WorkStation and allow you to view status information, print system pages, and set up
printing. For information about the job management features, see
Utilities
.
1
Use the line selection buttons to the right to select an option.
Eject CD/DVD
IP Address
Restart Server
Shut Down System
Server name
1
