98
Installation and Service Guide
Performing Backup and Restore
To restore the system from bootable backup media
To restore from the bootable media, you must have created a backup with the
Create bootable media
option. If you have
created a backup as bootable backup media, follow these instructions.
1
Shut down the E-85A.
2
Attach the bootable backup media to the E-85A.
3
Press the power button to turn on the E-85A.
4
Select the option to change the boot order, and select the item starting from “UEFI”.
The name of the bootable media appears next to UEFI (for example, UEFI: FLASH Drive AU_USB20 8.07).
Fiery System Installer starts in the same language that the backup was created in. You cannot choose another language.
5
Follow the instruction on the screen to complete the restoration.
Platform Utilities
Use Fiery System Installer for advanced procedures, such as erasing hard disks, or launching Windows Task Manager.
These utilities are available when you select
Platform Utilities
.
Note:
The
Platform Utilities
is available only on the monitor.
Erase data from hard disk drive(s)
If selected, the following methods are provided:
•
Randomized erase for writing random data to all disk sectors before writing zero.
•
Quick erase for writing zeroes to all disk sectors.
Advanced backup management
Allows the Administrator to:
•
Load backup settings from a USB drive to apply to system backup images.
•
Save or restore backup history files.
•
Search for backup images created on a replaced system to be applied to the current one.
Launch Windows Task Manager
Starts the Windows Task Manager.
Important:
This procedure requires a monitor, mouse, and keyboard to be attached to the E-85A.
