EFI E-46A Installation And Service Manual Download Page 37

Page: 37 / 134

Installation and Service Guide: Color Controller E-46A

Using the E-46A

•

Reboot system: shuts down all Fiery server software and reboots the system.

•

Restart Server: resets the Fiery server software, but does not reboot the entire system.

•

Brightness: sets the brightness level of the Fiery QuickTouch screen.

Figure 16:

Quick options menu

Using the E-46A from printer operation panel

The

“Fiery”

icon on the printer operation panel allows you to interact with the E-46A from the printer. The menus

provide access to many of the same options available from Command WorkStation.

Figure 17:

The printer operation panel

To access the E-46A from printer operation panel

Press the

Home

button on the printer operation panel.

Main

Waiting Jobs:

Idle

Paper Tray Status:

Document 3

Document 4

Document 1

Document 2

Printed Jobs:

Job List

Tools

Suspend Printing

Resume Printing

Summary of Contents for E-46A







































































































































Search results

Summary of Contents for E-46A

Reviews:

Related manuals for E-46A

Brands by name

Popular brands

EFI E-46A, Installation And Service Manual

Search results

Summary of Contents for E-46A

Reviews:

Related manuals for E-46A

Brands by name

Popular brands