EFI E-45, Installation And Service Manual, Page: 90 / 126

90 Installation and Service Guide: Color Controller E-45
Performing Backup and Restore
6
In the
Backup
dialog box, select the settings you want to back up.
7
Enter a file name and location, specify if you want to add the date to the file name, and then click
Backup
.
8
Click
OK
.
Restoring the system configuration
You can restore the system configuration of the E-45 to its previous state using a previously-saved system configuration
file. For more information about the system configuration file, see
page 89 .
If you could not save a system configuration file, you must configure Setup. After you exit Setup and the E-45 reboots, ask
the site administrator to restore any archived settings and files. For more information, see
Configuration and Setup , which
is part of the user documentation set.
To restore the system configuration from Command WorkStation
1
Launch Command WorkStation and connect to the E-45 with Administrator privilege.
The default Administrator password is
Fiery.1
(case-sensitive), but the site administrator may have changed the
password.
2
Select
Device Center
>
General
>
Tools
>
Backup & Restore
, and click
Restore
>
Next
.
3
Select the item to restore, and click
Next
.
You can specify the backup file using the
Browse
button, or you can select a recent backup.
4
Select settings to restore and click
Next
.
5
Click
Finish
.
To restore the system configuration using Configure
1
Start a web browser and access the E-45 by entering the server name or IP address of the E-45.
2
From WebTools, select
Configure
tab >
Launch Configure
.
3
Log on with Administrator privileges and click
OK
.
The default Administrator password is
Fiery.1
(case-sensitive), but the site administrator may have changed the
password.
4
On the left side, choose
Fiery Server
>
Restore
.
5
Select the reference file and data file. Click
Next
.
For more information, see page 89 .
6
Select settings to restore and click
Next
.
7
Click
Reboot
.