Replacing parts
Generally, the E-45 requires no regular service or maintenance. Use the procedures in this chapter to inspect, remove,
reseat, and replace major hardware components.
Overview
This chapter includes information about servicing the following components:
•
Boards and cables
•
Fiery QuickTouch display module
•
Motherboard components (DIMMs, CPU, and battery)
•
Fan
•
Power supply
•
Hard disk drive
•
DVD drive
Replacement parts are available from your authorized service representative. The terms “replace” and “replacing” are used
throughout this document to refer to the reinstallation of existing components. Install new components only when
necessary. If you determine that a component that you have removed is not faulty, reinstall it.
Note:
Replacement parts and specifications are subject to change. Install the correct parts as directed by your service/
support center.
The tools required to service the E-45 are listed on
.
Important:
When performing the service procedures described in this chapter, follow the precautions listed on