EFI E-45, Installation And Service Manual, Page: 30 / 126

30 Installation and Service Guide: Color Controller E-45
Using the E-45
•
Server Configuration page
provides general information about the hardware and software configuration of the E-45, the
customer’s current settings for Setup, the current calibration, and the IP address of the E-45.
Printing the Server Configuration page can be helpful during installation, Setup, and service. After installing the E-45
(including connecting to the network) and before default settings are changed in Run Setup, you can obtain a record of
the defaults by printing the Server Configuration page.
To print E-45 pages
1
At Fiery Ticker screen, click “
>>
” icon on the upper left corner, and choose
Print Pages
.
The Print Pages sub-menu displays the list of available E-45 pages.
2
Choose the page that you want to print from the sub-menu.
The E-45 sends the selected page to the printer.
3
If you printed the E-45 Test Page, examine the quality of the Test Page from the printer.
If the Test Page prints, you know the E-45 is functional and the connection between the E-45 and the printer is working.
If the Test Page fails to print, look up printing problems in
“Table 4: E-45 error messages and condition” on page 111.
When you examine the Test Page, keep in mind the following:
• All color patches should be visible, even though they may be very faint in the 5% and 2% range.
•
Each color’s patch set should show uniform gradation from patch to patch as the color lightens from 100% to 0%.
Poor image or color quality may indicate a need to calibrate the system or service the printer. Information on the Test
Page includes the date and time of the last calibration so the Test Page can be kept for future reference. For more
information, look up printing problems in
“Table 4: E-45 error messages and condition” on page 111, or see Color
Printing , which is part of the user documentation set.
Command WorkStation
As an E-45 service technician, you will typically log on to the system as Administrator. For more information about using
Command WorkStation, see
Command WorkStation Help .
About Configure
You can access Configure from Command WorkStation or WebTools. For information about using Configure, see the
Command WorkStation Help.
To access Configure from an Internet browser
1
Open an Internet browser and type the IP address of the E-45.
2
In WebTools, click
Configure
icon on the left.
3
Log on with Administrator privileges.