S
ETTING
UP
FROM
THE
C
OPIER
C
ONTROL
P
ANEL
29
General Setup
General Setup lets you specify system information that pertains to the E-42B and users.
The submenus and options appear in sequence. Default values, where applicable, are
underlined. Words shown in italics indicate that a product- or site-specific value is displayed.
Server Setup
Basic
Server Name
Default server name
Enter a name for the E-42B (a maximum of 15 characters). This is the name by which the
E-42B appears on the network. When you change the Server Name with this option, the new
name is also applied to the Windows Printing Server Name (
).
N
OTE
:
If you set up more than one E-42B, do not give them the same name.
Time Zone
List of zones
Choose the appropriate time zone from a list of supported zones.
Adjust for Daylight Saving Changes
Choose this option to adjust the system time of the E-42B when Daylight Saving Time
occurs.
Set Time Automatically
Choose whether to set the system time of the E-42B automatically by means of a time
(SNTP) server.
Time Server
List
Choose the server with which to synchronize the E-42B.
Queues
To enable users to access the utilities and WebTools or print to the E-42B over a TCP/IP
network, you must publish, at a minimum, the Hold queue, Print queue, or Sequential Print
queue. Only the queues that you publish are available to users.
N
OTE
:
Sequential Print queue allows the E-42B to maintain the print order on print runs
consisting of many jobs (First In, First Out). While a Sequential Print run is taking place, all
other jobs that are not part of the run will wait to be processed.
