S
YSTEM
R
EQUIREMENTS
18
Physical connection to the network
Before you install the E-42B on the network, it is strongly recommended that you read
“Stages of installation on the network”
on page 9. Step
of installing the E-42B on the
network is to physically connect the E-42B to the network. Use the network port on the
E-42B.
Use caution when shipping heavy objects. If you must lift and move heavy objects that are
connected to the E-42B, contact your service representative.
E-42B connector panel
1
Power cable
2
Power switch
I: Power ON
O: Power OFF
3
Network port (RJ-45)
4
VGA port
5
DVI port
6
USB ports
7
Crossover Ethernet port
1
4
3
5
2
6
6
7
