91
Installation and Service Guide: Color Controller E-36A
Performing Backup and Restore
To access the Fiery System Restore from WebTools
1
Open an Internet browser and type the IP address of the E-36A.
Note:
As a security measure, WebTools is designed to work only over Hyper Text Transfer Protocol Secure (HTTPS).
By default, WebTools uses a self-signed certificate created by the Fiery. This causes the web browser to display a
untrusted certificate message while accessing WebTools. It is safe to ignore this message and proceed to access
WebTools.
2
In
WebTools
, click the
Fiery System Restore
tab on the left side.
3
Log on with Administrator privileges and click
OK
.
Backing up or restoring the E-36A
The following tasks describe using Fiery System Restore on WebTools. Fiery QuickTouch uses the same menu
selections and features for backing up and restoring the E-36A. Refer to the following tasks if you are using Fiery
System Restore on Fiery QuickTouch.
To setup automatic scheduled backup
Note:
When you set up the scheduled backup, only the latest backup will be stored. Previous backups will be deleted.
1
In
Fiery System Restore
, click
Schedule
Backup
.
If you have not logged in as an
Administrator
user, you are required to do so. Enter the administrator’s password
and click
Log In
.
2
Select
Enable automatic backup
, and select when you want to start the backup process on the E-36A.
Note:
The backup process takes more than an hour to complete and it requires the E-36A to be Idle status. If the E-
36A is not in Idle status, the backup process will not start.
3
Click
Save
.