Efco SWAPLOADER SL-185, Parts And Operation Manual

Page: 36 / 109

02/08/11
TRUCK FRAME
(REF)
ADDITIONAL NOTES:
1. Prior to any welding, consult the
truck manufacture for any special
precautions that may need to be
taken. Typically the batteries must be
disconnected and the ground lead
from the welder should be as close to
the part being welded to avoid the
possibility of arcing across bearings,
gears, etc.
2.
All welds should be done utilizing a
low hydrogen welding process.
INSTALLATION INSTRUCTIONS (continued)
5.
Weld the bumper weldment to the vertical channels (See Fig. 1 & 3).
FIG. 2
FIG. 3
1
2
MATERIAL LIST
ITEM QTY P/N DESCRIPTION
WT lb.
PER EA.
1 1 52H12 REAR BUMPER WDMT 95.66
2 2 63H94 VERTICAL CHANNEL 9.58
TOTAL 114.82
REAR BUMPER ASSEMBLY
(52H11)
1800 NE Broadway Avenue, Des Moines, Iowa, U.S.A. 50313-2644
Phone: (515) 266-3042
•
Fax: (515) 313-4426
•
Toll Free: (888) 767-8000
E-Mail: sales@swaploader.net
•
Web Site: www.swaploader.com