Mobile animal stunning device VBE-M
5
2.2. Assessment of residual risk
Recommendations to minimize residual risk (for people and the environment) when operating the device:
●
carefully reading the user manual and undergoing training in operating the device as well as health and
safety rules at the given workplace ;
●
using the device only for its intended purpose;
●
carrying out modifications and repairs only by the authorized service centre;
●
carrying out maintenance work only after disconnecting the device from the power supply;
●
checking the technical condition of the device always before operation;
●
connecting the device to the grounded mains while working in mains mode ;
●
preventing minors or untrained persons from accessing the device.
CAUTION!
Residual risk occurs in case of failure to comply with recommendations and guidelines listed
above.
3. CONTENTS OF THE SDHC CARD
On the SDHC card of the device there are folders
Deutsch
,
English
,
Español
and
Français
,
containing materials and information intended for device users:
Table 1 Contents of subfolders
No. Subfolder name
Content
1
User manual
User manual, specification, parts list.
2
Parameters
The
pigpar3.bin
file with service parameters.
3
ADAUSBDrv
USB converter installation files
4
PC
Software installation files for connecting the
VBE-M
to a PC
4. INFORMATION AND WARNING SIGNS
4.1 Markings on the housing
Fig. 1 Information frame
Input
U
=
230
V
(rated
voltage)
f
=
50
Hz
(frequency)
P
<
700
W
(maximum
power)
I
<
3
A
(maximum
current)
Output
U
<
400
V
(maximum
output
voltage)
I
<
0.02
÷
2.5
A
(stunning
current)
f
=
50
÷
800
Hz
(frequency)
E
=
0.1
÷
99.9
C
(electric
charge)
IP55
S2 240
(duty
cycle)