EN530 HDTV Smart Encoder IV
Front Panel LCD
The front panel LCD displays information about the Encoder’s current and
recent operations. The top row of the display corresponds to primary caption
channel operations, and the bottom row corresponds to secondary caption
channel operations.
Mode
displays an abbreviation corresponding to the Local Entry Mode that
was last entered for each captioning service. For a list of Local Entry Modes
and abbreviations, see page 12.
Port
indicates the port that last input SD captioning and the baud rate at which
it is operating.
Data
displays Input and Output icons that blink to indicate transmission or
reception of 608 serial data for each service. A blinking “I” indicates that the
Encoder is receiving caption data from an input port. A blinking “O” indicates
that the Encoder is inserting this data into output video signals.
L21
displays Input and Output icons that blink to indicate transmission or
reception of 608 Line 21 data for each service. A blinking “I” indicates that the
Encoder is receiving caption data from the SD video input. A blinking “O”
indicates that the Encoder is inserting this data into output video signals.
XDS
displays an Output icon that blinks to indicate transmission of data.
A
blinking “O” indicates that the Encoder is inserting XDS packets from its
queue into output video signals.
The rightmost column in the display indicates the presence of HD and SDI
video sources. The top row will display
SDI
if a video source is present at the
rear panel SD-SDI IN, and the bottom row will display
HD
if a video source is
present at the HD-SDI IN. If an SDI signal is connected to HD-SDI IN for SDI
VANC encoding, the
HD
indicator will appear.
©2000-2007 EEG Enterprises, Inc.
5
