EN530 HDTV Smart Encoder IV
N/L
specifies whether the message is to be placed Next in line or Last in
line when it is sent to an output queue. The default setting is Last.
Example:
<CTRL+A>0 EEG_URL T2 3 D O N <ENTER>
EEG on the Web <ENTER>
<http://www.eegent.com>[t:p][C510]<ENTER> <CTRL+C>
will create a
two line message that displays and identifies a URL address. The use of
brackets, attributes, and checksum is per EIA-608B specification. The message
will be placed next in the T2 output queue, inserted 3 times, and then deleted.
Output Message
<CTRL+A>1 Title [Channel] [Repeat] [K/D] [O/H] [N/L] <ENTER>
Places a previously stored message into the appropriate text channel output
queue. Any parameters that are not specified will retain the values the message
was last stored with. The character following <CTRL+A> in the command is a
one. If O/H is set to H, the message will not be output, and this command can
be used to change the messages’ parameters.
Remove Message from Queue
<CTRL+A>4
Title [K/D] <ENTER>
Removes all instances of the specified message from the output queue. If the
last K/D parameter associated with the message is D, the message will also be
deleted from memory. If the message is being output as this command is
received, the current repetition will be allowed to finish.
©2000-2007 EEG Enterprises, Inc.
22
