EEC SE 7430, User Manual

Page: 20 / 106

12
1.6 Key Features and Benefits: SE Series
1.CAL-ALERT

Alerts the operator that the machine is due for
calibration in advance of the calibration due date.
2.TWO CONTINUITY TEST MODES
Two test modes allow for a basic Continuity test to be
performed simultaneously with the Hipot test, or a
stand-alone Continuity test to be performed
independently for higher resistance and point-to-point
applications.
3.PATENTED SMARTGFI

SmartGFI™ disables the instrument’s output voltage in
less than 1 millisecond if excessive leakage to ground
is detected. If enabled, SmartGFI™ automatically
detects if the DUT is floating or grounding and turns
ON or OFF accordingly.
4.SECURITY ACCESS
Allows the operator to set different levels of access to
the instrument’s setup programs. Users can setup
passwords for restricting access to certain parts of the
menu.
5.EXPANDED TEST MEMORIES
User can link up to 200 steps in a single test file with a
total of 2000 steps available in memory.
6.REAL CURRENT MEASUREMENT
SE simultaneously monitors real and total current in
AC Hipot mode on the same screen.
7.EXCLUSIVE PROMPT AND HOLD
FUNCTION
SE allows operators to setup a user-configured
message that is displayed in between test steps. This is
a very convenient feature for applications where test
leads need to be moved or when DUT switches need
to be activated as part of the test cycle.
8.DIGITALLY CONTROLLED ARC
DETECTION SYSTEM
Allows the operator to choose whether low-level arcs
should be detected. The operator can select from
multiple sensitivity levels.
9.ELECTRONIC RAMPING (UP AND
DOWN)
Allows the operator to linearly increase or decrease
the output voltage to the DUT over a specified period
of time. Minimizes any damage to sensitive DUT’s
from quick high voltage changes.
10.PLC REMOTE INPUTS &
OUTPUTS
Two standard 9 pin interfaces provide outputs for
PASS, FAIL, RESET and TEST IN PROCESS signals. Inputs
include TEST, INTERLOCK, RESET and remote recall of
MEMORIES 1 - 3. Provides the user with the ability to