Web UI Home Page
12
4.
Status
You can click on Status to view basic information about your device.
4.1
Internet/LAN/WAN/WiFi
Your 5GEE Router and connection information including internet,
Ethernet LAN, Ethernet WAN, and WiFi can be found here. You can
connect, disconnect or change the SSID of the device.
On the Internet page you will find information related to the 5G or 4G
connection including network name, network type, signal strength, band,
LTE cell identifier and IP addresses.
4.2
Connected devices
All connected and blocked devices are displayed here. You can block
devices from accessing the network or the internet and control USB
access on this page.
How to connect and access a USB storage device:
1.
Connect a USB storage device to the USB port on the back of
the 5GEE Router. USB storage supports NTFS, FAT, and FAT32
formatted drives.
2.
Check that
Access storage
is enabled on the Connected devices
page.
3.
Connect the Windows or Mac OS device to your 5GEE Router –
(Microsoft Windows): Select
Start
>
Run
and enter
\\192.168.1.1
in the box and click
OK
. If prompted, enter a
Username of
admin
and the password will be the Log in
password for your 5GEE Router.
(Mac OS): Select
Go
>
Connect to Server
. In the Server Address
field enter
smb://192.168.1.1
and click
Connect
. If prompted,
enter a Username of
admin
and the password will be the Log in
password for your 5GEE Router.
Summary of Contents for 5GEE
Page 1: ...USER GUIDE 5GEE Router...
Page 29: ...26 Settings...
