Thank you for choosing eLEDing!
It is important that you read this set-up instruction before installing
Any questions or issues, please contact us before returning
Our goal is 100% customer satisfaction
Please post your positive feedback on the web-stores
We appreciate your business! Thanks again!
Rev: 052820
eLEDing EE801WLW
Fig 1
Fig 3
Solar Powered Garden, Pool LED Lights
Initial activation:
•
It’s highly recommended to charge the light under direct sunlight for 1 day prior to installation. The battery
charges even when the light is off.
•
Press the ON/OFF button at the bottom of the light fixture to activate light unit (Fig 1).
•
Once activated during daytime the light will shut off automatically within a few seconds. And then will turn on only
in darkness. For test the unit during the day, you may use a cardboard covers the solar panel, the light will on
shortly and after you remove the cardboard the light will off then.
Installation: (Setting location is very important!)
Choose a flat and stable mounting surface with maximum exposure to direct sunlight. It is essential that the solar panel
receives at least 4 hours of direct sunlight every day on average in order to ensure dusk to dawn performance.
Make
sure no shadow or anything will block any part of the solar panel during the day.
(Fig 3)
1. For wood surfaces of Ground floor or Wall mounting, set the light on the surface, put screws all the way into setting
positions with tight by screwdriver.
2. For surfaces other than wood such as concrete, brick or stucco,
use a masonry bit (with appropriate size & length) to drill clearance holes.
Insert the plastic anchors and then tight the light with screws (Fig 2-Model A)
3. For pool/water light: Just put light units into the water
4
. Set on the grass, use spike insert to grass (Fig 2-Model B)
Fig 2
