Edwards Porta Power, Safety & Instruction Manual

Page: 6 / 33

4
Danger Panel Warning Panel
Electrical Hazard
This is the electrical hazard symbol. It
indicates there are dangerous high volt-
ages present inside the enclosure of this
product. ONLY qualifi ed, authorized, main-
tenance, service or Certifi ed Electricians
should gain access to electrical panel. Do
not operate this equipment from any power
source that does not match the voltage
rating stamped on the equipment. Refer to
the Manufacturer’s Identifi cation Label for
operational requirements.
Lockout Power
Danger circuits are live. Lockout/Tagout the
upstream power source. Lockout/Tagout
machinery according to Employer proce-
dures.
Voltage
(Varies by consumer requirement)
Indication of operating power requirements.
This product should be operated only from
the type of source indicated on the manu-
facturer’s identifi cation label Installation
should be in compliance with applicable
sections of the National Electric Code.
Consult your local building code before
installing.
Phase
(Varies by consumer requirement)
Indication of electrical phase requirements.
This product should be operated only from
the type of source indicated on the manu-
facturer’s identifi cation label Installation
should be in compliance with applicable
sections of the National Electric Code.
Consult your local building code before
installing.
Horsepower
(Varies by model)
Indication of horsepower requirements. This
product should be operated only from the
type of source indicated on the manufactur-
er’s identifi cation label Installation should
be in compliance with applicable sections
of the National Electric Code. Consult your
local building code before installing.
Hertz
(Varies by consumer requirement)
Indication of electrical cycles per second.
This product should be operated only from
the type of source indicated on the manu-
facturer’s identifi cation label Installation
should be in compliance with applicable
sections of the National Electric Code.
Consult your local building code before
installing.
Wear Personal Protective
Equipment
To avoid physical hazard, always wear per-
sonal protective equipment. Wear protec-
tive eyewear, clothing, gloves, footwear,
head-gear and hearing protection while
operating or servicing this machinery.
Fluid Injection Hazard
Hydraulic hoses and cylinders are under
pressure. Pressurized fl uid can pierce skin
and cause severe injury. To avoid physical
hazard, always wear personal protective
equipment. Keep hands clear while oper-
ating. Lockout power before servicing.
Immediately replace guards after adjust-
ment, repair or service.