Edwards nRVi, Instruction Manual

Page: 90 / 100

Spare
Item numbers
Hydrocarbon-prepared
pumps
PFPE-prepared pumps
Outer shaft seal kit A65201134 A65201134
Rotor sleeve kit A65201136 A65209136
* Service kit descriptions and fitting instruction descriptions are in line with 50 Hz
pumping capacity. Therefore the RV3 kit should be used for nRV4i, RV5 for nRV6i, RV8 for
nRV10i and RV12 for nRV14i.
11.2 Accessories
Table 34
Accessory item numbers
Accessory Refer to section Item number
ITO20K Inlet catchpot Inlet catchpot on page 87 A44110000
ITF20K Inlet dust filter Inlet dust filter on page 87 A44215000
ITD20K Inlet desiccant trap Inlet desiccant trap on page 87 A44510000
ITC20K Inlet chemical trap Inlet chemical trap on page 88 A44410000
FL20K Foreline trap Foreline trap on page 88 A13305000
EMF10 Outlet mist filter Outlet mist filter on page 88 A46226000
EMF20 Outlet mist filter Outlet mist filter on page 88 A46229000
Gas ballast adaptor Gas ballast adaptor on page 88 A50502000
Gravity oil drain kit Gravity oil drain kit on page 88 A50501000
Oil drain extension Oil drain extension on page 88 A50503000
Exhaust nozzle kit Exhaust nozzle kit on page 88 A50509000
Vibrating isolators (pack of four) Vibration isolators on page 88 A24801404
EBV20 Solenoid operated gas ballast
valve
Solenoid operated gas ballast
valve on page 88 220 - 240 V 50/60 Hz A50006930
100 - 120 V 50/60 Hz A50006984
PV25EK Pipeline valve (aluminium)
Solenoid operated pipeline
valve on page 89
220 - 240 V 50/60 Hz C41301000
110 - 127 V 50/60 Hz C41303000
PV25EK Pipeline valve (stainless steel)
Solenoid operated pipeline
valve on page 89
220 - 240 V 50/60 Hz C41302000
110 - 127 V 50/60 Hz C41304000
Page 86
A65901880_D - Spares and accessories