Figure 12 Remove the counter nut
CS/
5295/
A
1.
Put the pump upside down on the foam (optionally, put it in the horizontal
position).
2.
Use the torque driver with 14 mm hex socket to remove the counter nut.
Figure 13 Remove the M8x1 nut
CS/5296/
A
Use the torque driver with 12 mm hex socket to remove the M8x1 nut.
06/2021 - ©Edwards Limited
Page 17
300872820_002_C2
B8J203880_C
300872820_002_C2 - Disassembly
Summary of Contents for nEXT 1230H
Page 32: ...edwardsvacuum com...
